You can record an RTC session as individual streams and also get it transcoded through a post-session service to create a single composite video file that can be retrieved and replayed using any Video Player. You can configure the Room for auto-recording or invoke APIs to start recording when required.
For details on fetching recorded sessions, refer to How to fetch Recordings?
Table of Contents
Auto-Recording
You can configure a Room with { settings: { auto_recording: true }} during Room Creation to automatically start recording the RTC session taking place in the Room. The Moderator can still stop recording in a Room with Auto-Recording by utilizing the stopRecord() method given below.
On-Demand Recording
The EnxRoom.startRecord() method allows the Moderator to start recording the session and EnxRoom.stopRecord() method is used to stop recording. You might need to provide these options on UI for the Moderator to access them.
There is no limit to the number of times a Moderator can start/stop recording.
Class: EnxRoom
Methods:
public void startRecord()– No parameter required.public void stopRecord()– No parameter required.
Observer: public void setRecordingObserver(EnxRecordingObserver-Object)
Callbacks:
-
onStartRecordingEvent– Acknowledgment to the Moderator when recording starts. -
onStopRecordingEvent– Acknowledgment to the Moderator when recording stops. -
onRoomRecordingOn– Notification to all the participants when the recording is turned on. -
onRoomRecordingOff– Notification to all the participants when the recording is turned off.
// Initiate Recording Observer to receive Callbacks
room.setRecordingObserver(this);
room.startRecord(); // To start recording
room.stopRecord(); // To stop recording
public void onStartRecordingEvent(JSONObject jsonobject){
// You started recording
}
public void onStopRecordingEvent(JSONObject jsonobject){
// You stopped recording
}
public void onRoomRecordingOn(JSONObject jsonobject){
// Recording has started - to all
}
public void onRoomRecordingOff(JSONObject jsonobject){
// Recording has stopped - to all
}
Error Codes & Exceptions
| Code | Description |
|---|---|
| 5007 | Unauthorized Access. When a participant tries to invoke startRecord(). |
| 5008 | Unauthorized Access. When a participant tries to invoke stopRecord(). |
| 5033 | Repeated startRecord() call while the previous request is in process. |
| 5034 | Repeated startRecord() call while the recording has already started. |
| 5035 | Repeated stopRecord() call while the recording has already stopped. |
| 5036 | stopRecord() call without starting to record. Non-Contextual method call. |
New Way to Record Live with an UI
Availability: v2.1.2+
Recording Live refers to a new process of creating a transcoded file in a live session with a custom layout without having to record individual streams. So, using Live Recording has double advantage:
- You get a transcoded file within minutes post session. Not to wait longer alike previous transcoding process.
- You have an option to define your own layout for the live recording process unlike previous transcoding process that creates in a predefined layout.
Auto Live Recording
You can configure a Room with to start Live Recording automatically as soon as the first person joing the Room. This may be done while creating a Room with the following settings:
"settings": {
"live_recording": {
"auto_recording: true,
"url": "https://your-custom-view-url"
}
}
- Know more about Room Creation Payload using our Video API.
Moderator can still stop live recording in a Room by using the stopRecord() method.
On-Demand Live Recording
Using SDK methods, a Moderator can start / stop live recording any time as he demands. The EnxRoom.startLiveRecording() method allows the Moderator to start live recording the session and EnxRoom.stopLiveRecording() stops it.
Start Live Recording
Class: EnxRoom
Observer: public void setLiveRecordingObserver(EnxLiveRecordingObserver enxLiveRecordingObserver)
Method: public void startLiveRecording(JSONObject jsonObject);
Parameter:
streamingConfig: Streaming configuration. Its a JSON object with following keys:
urlDetails– Its a JSON Object to define Custom View and its options.url– To specify the URL of custom view.any_custom_key_object– You may use any custom key or object that the your Custom View handles to change view/layout etc through query string.
Callback:
onACKStartLiveRecording– Acknowledgment callback to the Moderator when the Live Recording starts.
Response Body:
{data ={
confNum = 534010000012;
isRecordingInitiated = 1;
type = RecordingInitiated;
};
status ={
error ={
errorCode = 0;
errorDesc = "";
};
resultCode = 0;
success = 1;
};
}
onRoomLiveRecordingOn– Notification to all the users in the room that the Live Recording has started.onRoomLiveRecordingUpdate– Intermediate Notifications to all users about progress of the Live-Recording process.onRoomLiveRecordingFailed– Notification to all users if Live Recording failed to start or failed after getting started.
Response Body:
{
data = {
data = {
data = {
confNum = 534010000012;
isRecordingInitiated = 1;
type = RecordingInitiated;
};
status = {
error = {
errorCode = 0;
errorDesc = "";
};
resultCode = 0;
success = 1;
};
streamerDetails = {
agentId = "d6acdf34-01f3-ca66-2bcc-789363adc043";
broadCastStreamerID = "b5296afd-1357-1de1-c89d-5dc0aca3e5ae";
};
};
startedBy = "7f0f2b04-1ad4-4231-8fdc-9f9e014053b4";
};
type = "liveRecording-started";
},
enxRoom.setLiveRecordingObserver(this); //To get Live recording callback, the user needs to set this live recording observer
enxRoom.startLiveRecording(jsonObject)
// Where streamingConfig/jsonObject =
{
"urlDetails": {
"url": "url",
"layOut": {},
"chatOverlay": true/false
}
}
public void onACKStartLiveRecording( JSONObject jsonobject) {
// To the Moderator - Live Recording has started
}
public void onRoomLiveRecordingOn( JSONObject jsonobject) {
// To all the participants - Live Recording started
}
public void onRoomLiveRecordingUpdate( JSONObject jsonobject) {
// To all the participants - Live Recording updates
}
public void onRoomLiveRecordingFailed( JSONObject jsonobject) {
// To all the participants - Live Recording failed
}
Error Codes / Exceptions
| Code | Description |
|---|---|
| 5086 | Endpoint application is not connected to the Room. |
| 5097 | Start Live Recording methods are not available in the Chat-Only Room. |
| 5138 | Failed to Start Live Recording with invalid configuration parameter. |
| 5122 | Start Live Recording is in progress. Retrying to Start Live Recording is illegible. |
| 5139 | Live Recording is already running. Retrying to Start Live Recording is illegible. |
Stop Live Recording
Class: EnxRoom
Method:
- For Android SDK v2.1.2 –
public void stopLiveRecording(JSONObject jsonObject);
Parameter:
streamingConfig: Optional. Streaming configuration. You may pass Streaming configuration data as it was passed with startLiveRecording() method.
- For Android SDK v2.1.3+ –
public void stopLiveRecording()
Callback:
onACKStopLiveRecording– Acknowledgment callback when the Live Recording stops.
Response Body:
{
data ={
data ={
confNum = 534010000012;
isRecordingStopped = 1;
type = recordingStopped;
};
isRecordingStarted = 0;
status ={
error = {
errorCode = 0;
errorDesc = "";
};
resultCode = 0;
success = 1;
};
streamerDetails ={
agentId = "d6acdf34-01f3-ca66-2bcc-789363adc043";
broadCastStreamerID = "b5296afd-1357-1de1-c89d-5dc0aca3e5ae";
};
};
status = {
error ={
errorCode = 0;
errorDesc = "";
};
resultCode = 0;
success = 1;
};
streamerDetails = {
agentId = "d6acdf34-01f3-ca66-2bcc-789363adc043";
broadCastStreamerID = "b5296afd-1357-1de1-c89d-5dc0aca3e5ae";
};
}
onRoomLiveRecordingOff– Notification to all users in the conference that the Live Recording has stopped.
Response Body:
{
data = {
data = {
data = {
data = {
confNum = 534010000012;
isRecordingStopped = 1;
type = recordingStopped;
};
isRecordingStarted = 0;
status = {
error = {
errorCode = 0;
errorDesc = "";
};
resultCode = 0;
success = 1;
};
streamerDetails = {
agentId = "d6acdf34-01f3-ca66-2bcc-789363adc043";
broadCastStreamerID = "b5296afd-1357-1de1-c89d-5dc0aca3e5ae";
};
};
status = {
error = {
errorCode = 0;
errorDesc = "";
};
resultCode = 0;
success = 1;
};
streamerDetails = {
agentId = "d6acdf34-01f3-ca66-2bcc-789363adc043";
broadCastStreamerID = "b5296afd-1357-1de1-c89d-5dc0aca3e5ae";
};
};
stoppedBy = "7f0f2b04-1ad4-4231-8fdc-9f9e014053b4";
};
type = "liveRecording-stopped";
}
enxRoom.stopLiveRecording(jsonObject)
// For v2.1.2 - Where streamingConfig/jsonObject =
{
"urlDetails": {
"url": "url",
"layOut": {},
"chatOverlay": true/false
}
}
enxRoom.stopLiveRecording() // For v2.1.3+
public void onACKStopLiveRecording( JSONObject jsonobject) {
// To the owner - Live Recording has stopped
}
public void onRoomLiveRecordingOff ( JSONObject jsonobject) {
// To the participants - Live Recording stopped
}
Error Codes / Exceptions
| Code | Description |
|---|---|
| 5086 | Endpoint application is not connected to the Room. |
| 5097 | Start Live Recording methods are not available in the Chat-Only Room. |
| 5138 | Failed to Start Live Recording with invalid configuration parameter passed. |
| 5122 | Start Live Recording is in progress. Retrying to Start Live Recording is illegible. |
| 5140 | Live Recording is not running in room. To Stop Live Recording is illegible. |
| 5141 | Stop Live Recording is in progress. Retrying to Stop Live Recording is illegible. |
Error Codes
Live Recording Waiting Queue
| Error | Description |
|---|---|
| 7039 | Live recording request was in waiting, successfully removed the request from waiting |
| 7046 | Streaming request was in waiting, successfully removed the request from waiting |
| 7080 | Live recording/streaming request in waiting queue failed to start |
| 7081 | Live recording/streaming request in waiting queue failed to start |
| 7104 | Streaming request is in waiting, will be started soon |
| 7105 | Last streaming request is in waiting |
| 7207 | Live Recording request is in waiting, will be started soon |
| 7208 | Last live Recording request is in waiting |
Play a Recorded File
In case you want to play Recorded File directly from the Video Server, please note that those files are password protected. Portal Implemented HTTP Basic Authentication to secure recorded file storage.
Therefore, any Video Player, may not use the file-paths only to play them from Video Server. Player must provide access credentials to pass through the authentication process to play the file.
Map<String, String> header= new HashMap<String, String>(1);
final String cred = "USERNAME" + ":" + "PASSWORD";
final String auth = "Basic "+ Base64.encodeToString(cred.getBytes(),Base64.URL_SAFE|Base64.NO_WRAP);
header.put("Authorization", auth);
videoView.setVideoURI(Uri.parse("VIDEO_URL"),header);
videoView.start();
Note:
- There is an alternate way. You should download the files from the Video Server to your Server and play from there without or with any security measure you may like to deploy.
- Files from Portal Storage gets deleted after 72 hours. So, accessing them from the Video Server to play is not guaranteed beyond 72 hours.
Play a Recorded File
In case you want to play Recorded File directly from the Video Server, please note that those files are password protected. The Portal Implemented HTTP Basic Authentication to secure recorded file storage.
Therefore, any Video Player, may not use the file-paths only to play them from Video Server. Player must provide access credentials to pass through the authentication process to play the file.
Map<String, String> header= new HashMap<String, String>(1);
final String cred = "USERNAME" + ":" + "PASSWORD";
final String auth = "Basic "+ Base64.encodeToString(cred.getBytes(),Base64.URL_SAFE|Base64.NO_WRAP);
header.put("Authorization", auth);
videoView.setVideoURI(Uri.parse("VIDEO_URL"),header);
videoView.start();
Note:
- There is an alternate way. You should download the files from the Video Server to your Server and play from there without or with any security measure you may like to deploy.
- Files from Portal Storage gets deleted after 72 hours. So, accessing them from the Video Server to play is not guaranteed beyond 72 hours.